AMI BPFT7 Flange Block Bearings

G:M6x1; J:76.1 mm; T max.:100 °C; e:10 mm; Designation of bearing:US202G2; A2:26 mm; s1:11 mm; A1:11 mm; d:15 mm; H:81 mm;

S:17 mm; J:97 mm; Z:15.3 mm; A:32 mm; N1:19 mm; Weight:0.67 kg; B:34 mm; L:130 mm; G:R1/8"; H2:64 mm;

G:R1/8"; Weight:1.13 kg; A2:45.4 mm; Z:30.9 mm; C:25.7 kN; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; H:155 mm; s1:21.45 mm; A1:12.5 mm;

Ball Grade:Class 10; Grease Type:Unirex N2; Anti-Rotation Pin:Yes; End Cap Groove:Yes; d:50.0000 mm; Bearing Insert Material:Steel; Expansion Type:Non-Expansion; Retainer Material:Nylon; Seal Type:Single Lip; Manufacturing Plant Location:Rogersville, TN;

Characteristic cage frequency, FTF:0.46 Hz; Cr:45 kN; Characteristic outer ring frequency, BPF0:12.46 Hz; Maximum tightening torque:360 Nm; Min operating temperature, Tmin:-20 °C; D:90 mm; G:M30X1.5; G1:32 mm; Track load capacity spherical outer ring:11.4 kN; Mass:1.95 kg;

Designation of bearing:UC212-36G2; C:52.5 kN; N:20mm; T max.:100 °C; Recommended tightening torque for set screw:16.8 Nm; B:65.1 mm; Designation of housing:P212N-; G:M6x1; L1:70 mm; C0:32.8 kN;

Expansion Type:Non-Expansion; Ring Size:Standard; Base to Center Height:Not Applicable; Ball Material:Steel; Manufacturing Plant Location:Rogersville, TN; Grease Type:Unirex N2; d:1.0000 in; Flinger Material:Steel; Anti-Rotation Pin:Yes; Bearing Insert Material:Steel;

d1:37.4 mm; L:70 mm; T max.:200 °C; B:34.8 mm; d:25.4 mm; H2:70 mm; J:50.8 mm; Weight:0.64 kg; C0:7.88 kN; C:14 kN;

Bearing Outer Ring Material:Steel; Bearing Series:206 Series; Base to Center Height:Not Applicable; Anti-Rotation Pin:Yes; Seal Type:Triple Lip; Bearing Bore Shape:Round; Brand:Baldor-Dodge; UPC:782476476083; Max Bearing Speed:5250 rpm; Ball Grade:Class 10;

H:98 mm; T max.:200 °C; C0:15.2 kN; C:25.7 kN; L1:225 mm; SW:3.97 mm; T min.:-20 °C; Designation of housing:SP206-207/72-; d:31.75 mm; G:R1/8";

L:116 mm; C0:22.9 kN; T min.:-20 °C; C:33 kN; s1:25.2 mm; B:22 mm; Z:38.9 mm; A1:13 mm; A2:49.2 mm; Designation of bearing:LK210G2H;

S:11.8 mm; Z:39.3 mm; T max.:100 °C; N:16mm; Designation of housing:FA211N-; H:219 mm; G:M6x1; Recommended tightening torque for set screw:22 Nm; C:43.55 kN; L1:104 mm;

d1:85 mm; N1:28 mm; L:260 mm; T min.:-20 °C; C:57.2 kN; Weight:6.51 kg; T max.:100 °C; Adapter sleeve reference:H2313-36; G:R1/8"; N:22mm;

Mass:0.02 kg; Brand:NTN; Fw:35 mm; Characteristic cage frequency, FTF:0.47 Hz; b:27 mm; Characteristic outer ring frequency, BPF0:5.6 Hz; Dw:2.5 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:6.4 Hz; Bc:27 mm;

T max.:100 °C; T min.:-20 °C; J:70 mm; s1:17 mm; Weight:0.83 kg; Dz:60 mm; Designation of bearing:UC205-16G2L4; C0:7.88 kN; A:27 mm; Z:39.2 mm;